| High Process Temperature Version Cryogenic Version | Reduced Bore Type |
Model | Model DY Vortex Flowmeter (Remote Type) Combination with model DYA Vortex Flow Converter (Remote Type) Option for High Process Temperature Version: /HT, Option for Cryogenic Version: /LT | Option: /R1, /R2 1 size down: /R1 2 size down: /R2 (Option for High Process Temperature Version: /HT) |
Fluid to be Measured | Liquid, Gas, Steam (Avoid Multiphase Flow and Sticky Fluids) |
Nominal Size | Wafer | 15 to 100 mm | N/A |
Flange | 15 to 400 mm | R1: 25 to 200 mm (Detector: 15 to 150 mm) R2: 40 to 200 mm (Detector: 15 to 100 mm) |
Accuracy | Liquid | ±0.75% of Reading (Depends on Reynolds number) | ±1.0% of Reading (Depends on Reynolds number) |
Gas Steam | ±1.0% of Reading (Depends on flow velocity) |
Output Signal | Dual Output (Both analog and pulse output available) Communication: HART 5/HART 7, BRAIN, FOUNDATION™ fieldbus |
Process Temperature | -29 to 450 deg C (/HT) -196 to 100 deg C (/LT) | -29 to 250 deg C -29 to 450 deg C (/HT) |
Process Pressure | -0.1MPa (-1kg/cm2) to flange rating |
Ambient Temperature | -29 to 85 deg C (Depends on model type) |
Ambient Humidity | 5 to 100% RH (No Condensation) |
Mounting | Flange or Wafer Type JIS 10/20/40K ANSI 150/300/600/900 DIN PN 10/16/25/40/60/100/160 | Flange Type only JIS 10/20K ANSI 150/300 |
Electrical Connection | JIS G1/2 Female, ANSI 1/2NPT Female, ISO M20×1.5 Female |
Explosion Protected Type | TIIS Ex d, FM Ex d/Ex ia, ATEX Ex d/Ex ia, CSA Ex d/Ex ia, IECEx Ex d, SAA Ex ia |
Material | Body: Stainless steel (Special: Hastelloy, Carbon steel) Shedder Bar: Duplex stainless steel (Option: Stainless steel, Hastelloy) Gasket: Stainless steel with Teflon coating (/HT: with Silver plating) Converter housing, case and cover: Aluminum alloy (Option: Stainless steel) |